Installation Guides

Steel Wood Burning Outdoor Fire Pit Assembly Instruction

2022-12-26

Steel Wood Burning Outdoor Fire Pit Assembly Instruction


Please check local regulations before using the fire pit.
This fire pit is for outdoor use only! Do not use on a wooden deck.
This fire pit is for burning logs only! Do not burn coals, leaves or other
combustible materials to burn in the fire pit.
Not suitable for children. Keep children and pets away from the fire pit.
Fire pits are hot, use with care. Do not touch hot fire pits with your hands.
Never leave a burning fire pit unattended and always extinguish the fire completely before leaving the fire pit.
Always extinguish the fire completely before leaving the fire pit.
Stay at least 5 feet away from any structure.
Do not use near flammable or combustible objects or materials.
Only chrome-plated baking pans are used for cooking. Not
are for cooking and should not be used for this purpose. Operating Instructions
Place the wood on the grate and light with a match. Do not overload the wood.
Use playing cards (provided) when operating.
We do not recommend pouring water on the fire unless it is necessary. The fire should be allowed to extinguish itself.
Shingles are fragile, so handle with care.
Care and Maintenance
This fire pit is a high quality product that will last for many years. Frame Construction The frame construction of this unit is extruded from powder coated steel and should resist rusting under normal use. Rust. If rusting occurs, we recommend using a steel brush followed by a coat of high-temperature anti-rust paint on the affected area. Spray high temperature rustproofing paint. For additional rust prevention of the bowl. For additional rust prevention on grates and mesh covers, we recommend applying a high temperature primer (such as rustoleum or similar brand) prior to use before application. You can cover the fire pit with a protective cover
(supplied). Before using the protective cover, make sure the fire pit has cooled down completely
before using the protective cover.
Warning!
 The use of alcohol, prescription or over-the-counter medications may impair the ability to properly assemble or safely operate this fire pit.
The use of alcohol, prescription or over-the-counter medications may impair the ability to properly assemble or safely operate this fire pit.
 When using this fire pit, take the same precautions as with any open flame.
 Do not use this fire pit for indoor heating. Toxic carbon monoxide fumes can
build up and cause suffocation or death.


Part List 
Description
Drawings
 Qty. 
A  Fire Bowl

1
B Outer Ring

4
C Leg

3
D Log Grate

1
F Mesh Lid

1
G Lid Ring

1
H1 Bolt(M6x8MM)

8
H2 Bolt(M6x12MM)

10
I Support Bar

4
J Connector A

4
K Connector B

4
L Poker

1
M Allen Wrench

1
N PVC Cover

1


                             Installation steps
 

Step 1

Attach the Legs (C) to the Fire Bowl (A) byusing bolts (H2). Finger Tighten and do not fullytighten all bolts. (View Fig 1)

Step 2

 Attach Support Bar (I) and Connect B (K)to the Fire Bowl (A) by using bolts (H1). Connect 4PCS of Outer Ring (B) to a round ring. Hold the fixed round ring by Connector A (J) and Connector B (K) by using Bolts (H2) . Tighten all the bolts accordingly with the provided Allen Wrench until all pieces fit together securely(View Fig 2)


Step 3

Put Log grate (D) into the Fire Bowl (A),Affix Lid Ring (G) to the Mesh Lid (F) by screwing the lid ring into the upper hole of the mesh lid. Then place the mesh lid on the Fire Bowl (A). (view Fig 3)

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept